3. It can enhance DPDK to be more efficient and flexible in packet forwarding and packet processing.
Key Features
1. Dynamic Device Personalization (DDP)
2. Supports both RDMA iWARP and RoCEv2
3. Application Device Queues (ADQ)
4. IEEE 1588 Precision Time Protocol (PTP)
1 G
A PCI Express network card, also known as a PCIe Network Card, is a hardware device used to connect a computer to a local area network (LAN) or the internet. It is designed to provide a high-speed and reliable network connection by utilizing the PCI Express interface.
Features
High Performance
Higher potential bandwidth and greater flexibility than PCI
Advanced Features
Support for multiple network protocols, VLAN tagging, and advanced network management capabilities
Multi-Scheme
Multiple solutions such as Intel/Broadcom/Mel1anox chips
RDMA Technology
RDMA technology provides high bandwidth, low latency, and broad compatibility for cloud storage targets
Six Gigabit SFP Ethernet network adapters.
This adapter card can be aggregated into groups.
The adapter card can perform TCP / UDP / IP checksum sharing and TCP segmentation tasks.
Onboard is equipped with 6 SFP slots,compatible with a variety of Gigabit SFP modules.
Based on Intel I350 main control development
Equipped with four SFP optical ports, supporting 1G data transmission rate
PCIe2.1 (2.5GT/s) x4; x8, x16 compatible
IEEE1588 PTP support
Jumbo Frames support
Equipped with 2 ports, each port rate up to 1Gb/s
Support for packets up to 9.5 KB (Jumbo Frames)
PCI Express* v 2.0 with 5.0 Gt/s and Support for x4 links widths
Dual-port Gigabit Fiber Ethernet Adapter
PCI Express (PCIe) v2.1(5.0GT/s) x4 lanes
SFP Connectivity
Network Virtualization
Flexible I/O virtualization for port partitioning and QoS of up to 32 virtual ports
Vital Product Data(VPD) Support
Management Component Transport Protocol(MCTP)
Low Profile and Full Height Bracket
Used in data transmission such as firewalls and gatekeepers.
Each network port has an independent Gigabit channel network port and works independently of each other.
It can allow four network ports to work in full-duplex working mode at the same time.
At the same time, support customers to use different Gigabit fiber modules according to the actual operation.
An Ethernet network adapter developed based on the Intel 82576 master control solution
With a rate of 1G
Using a fully integrated 1000Base-SX/1000Base-LX Gigabit Ethernet MAC, allowing two ports to link at a Gigabit rate
A Gigabit PCIe x4 Ethernet network adapter with dual port copper ;
This adapter is mainly designed to be applied to servers and their application devices;
Intel 2-port Ethernet MAC+PHY controller with multi-megabit speed;
